Computer Servicing/ Networking Technician

Electronic Engineering Technology 

Comprehensive, Hands-on, Career-oriented curriculum!  
SOLID education designed by electronic engineering industry leaders!

The Anoka Technical College Electronic Engineering Technology (EET) program offers two Computer Servicing/Networking Technician awards: an associate in applied science (AAS) degree and a diploma.

The Computer Servicing/Networking associate in applied science (AAS) degree emphasis is a 72-credit program.  The program combines core electronic engineering technology skills with a broad background in computer support,networking and MnTC general education courses to provide graduates with  all the essential skills for success in the work place.

PDF  Program Guide

Prerequisites

See Graduation Requirements.

Credits

  TOTAL CREDITS
72
 Technical
57
 Electronic Technician Core
37
 ETEC1101  DC Electrical Theory/Lab
5
 ETEC1111  AC Electrical Theory/Lab
5
 ETEC1201  Solid State Electronic
5
 ETEC1240  Introduction to Computers for Technical Users        3
 ETEC1250  Digital I
3
 ETEC1270  Technical Documentation Lab
2
 ETEC1300  Op-Amps and Linear Integrated Circuits
2
 ETEC2010  Basic Wireless Communications
2
 ETEC2147  Data Acquisition and Signal Conditioning
4
 ETEC2070  Programmable Logic Controllers (PLCs)
2
 ETEC2137  Computer Controlled Systems Integrating LabVIEW
4
 
Computer Servicing/Networking Technician Emphasis
20 
 ETEC2181  Automation and Controls Concepts
4
 ETEC2251  A+ Certification & Computer Troubleshooting
6
 ETEC2260  Advanced Wireless Communications
3
 ETEC2281  Advanced Network Setup and Troubleshooting
7
 
General Education/MnTC Requirements
15
Fifteen (15) general education credits of Minnesota Transfer Curriculum (MnTC) are required. Student is required to take:
 *MATH1700  Pre - Calculus (approved MnTC Goal Area Four)
5

The remaining ten (10) credits must be taken from the Minnesota Transfer Curriculum (MnTC). 

*Additional MATH coureses may be needed to prepare for Pre-Calculus.

Program Sequence

 FIRST YEAR
 Fall Semester
 ETEC1101  DC Power Theory/Lab
5
 ETEC1111  AC Power Theory/Lab
5
 ETEC1250  Digital 1 
3
 **MATH or GEN ED  Based on Highest Level Placement Score
4
     
 TOTAL  
17*
 
 Spring Semester
 ETEC1201  Solid State Electronic Devices
5
 ETEC1270  Technical Documentation Lab
2
 ETEC1300  Op-Amps and Linear Integrated Circuits
2
 ETEC2137  Computer Controlled Systems Integrating LabVIEW
4
 GENERAL EDUCATION    6
     
 TOTAL  
19*
 
 Summer Semester
**MATH1700 Pre-Calculus 5
 SECOND YEAR
 Fall Semester
 ETEC2010  Basic Wireless Communications
2
 ETEC2147  Data Acquisition and Signal Conditioning
4
 ETEC2070  Programmable Logic Controllers (PLCs)
2
 ETEC2181  A+ Certification and Computer Troubleshooting
6
     
 TOTAL  
14
 
 Spring Semester
 ETEC2181  Automation and Control Concepts
4
 ETEC2260  Advanced Wireless Communications
3
 ETEC2281  Advanced Network Setup and Troubleshooting 
7
 *GENERAL EDUCATION  
3
     
 TOTAL  
14*

*For the AAS Degree: Eighteen (18) general education credits of Minnesota Transfer Curriculum (MnTC) are required. Student is required to take: MATH 1700 Pre-Calculus, 5-credits. The remaining 13 credits must be taken from one or more Minnesota Transfer Curriculum (MnTC) goal areas so at least two more goal areas are covered.

**Additional MATH courses may be needed to prepare for Pre-Calculus. MATH 801 Basic Math, MATH 1400 Algebra and Trigonometry, or MATH 900 Elementary & Intermediate Algebra are extra courses to assist in prepraring for Pre-Calculus.

Please consult your program advisor to select courese for the upcoming semester.

Graduation Requirements

All Anoka Technical College students must demonstrate basic competency in Math, English, and Reading. Competency may be demonstrated through achieving minimum cut scores in new student assessments (Accuplacer); through other assessment exemptions; or through successful completion of Basic Math, Basic English, and Reading courses, earning a “C” or higher before receiving a diploma or an associate in applied science degree.

 Also see graduation standards in Anoka Technical College Student Handbook.

NOTE: Program plans are subject to change. Please contact your program advisor for the most current program information.

Transfer Opportunities

The Anoka Technical College Computer Servicing/Networking Technician emphasis associate in applied science (AASprogram has credit transferability to the A+ Personal Computer Support Technician diploma; Electronic Controls Technician emphasis associate in applied science (AAS); Special Electronics Technician diploma; Electronic Technician diploma; Computer Servicing/Networking Technician diploma, Special Electronics Technician diploma, and Electric Certificate I, and Electronic Certificate II programs.

For students who want to continue their education and obtain their four-year degree, the Electronic Engineering Technology (EET) program, has articulation agreements with Minnesota State University (Mankato), Minnesota State University (Moorhead), Bemidji State University, and University of Minnesota Crookston. Students can complete most of these four-year degrees through online courses.

To see how this program transfers to other programs, review the Anoka Tech articulation agreements at Minnesota Transfer. Articulation agreements are transfer agreements with specific programs and partnering schools. These agreements detail how specific courses transfer to a specific program at the partnering school. For a complete list of Anoka Tech’s articulation agreements listed by program please see this Minnesota Transfer link.

This program may also include Minnesota Transfer Curriculum (MnTC) courses. MnTC courses transfer to meet MnTC general education courses throughout the Minnesota State Colleges and Universities (MnSCU) system. MnTC courses from Anoka Technical College transfer to any MnSCU institution to meet the same goal areas that are met at Anoka Tech.

Students are encouraged to contact the Office of Records and Registration at all transfer schools for details about the institution’s transfer process and policies.

For more information please visit our Transfer page.

Wage/Outlook/Advancement

The Special Electronic Technical emphasis is an individualized degree program that requires pre-approval from the electronic engineering department chairperson. See your program advisor for more information.

Wage information is available from the Minnesota Department of Education and the Minnesota Department of Employment and Economic Development.

 

Faculty

Daniel Truchon
763-576-4700

The Computer Servicing/Networking diploma emphasis is a 69-credit program.  The program offers core electronic engineering technology skills, along with a broad background in computer support and networking. 

PDF  Program Guide

Prerequisites

See Graduation Requirements.

Credits

  TOTAL CREDITS
69
 Technical
57
 Electronic Technician Core
37
 ETEC1101  DC Electrical Theory/Lab
5
 ETEC1111  AC Electrical Theory/Lab
5
 ETEC1201  Solid State Electronic Devices
5
 ETEC1250  Digital I
3
 ETEC1270  Technical Documentation Lab
2
 ETEC1300  Op-Amps and Linear Integrated Circuits
2
 ETEC2010  Basic Wireless Communications
2
 ETEC2070  Programmable Logic Controllers (PLCs)
2
 ETEC2137  Computer Controlled Systems Integrating LabVIEW
4
 ETEC2147  Data Acquisition and Signal Conditioning
4
 
Computer Servicing/Networking Technician Emphasis
20
 ETEC2181  Automation and Controls Concepts
4
 ETEC2251  A+ Certification & Computer Troubleshooting
6
 ETEC2260  Advanced Wireless Communications
3
 ETEC2281  Advanced Network Setup and Troubleshooting
7
 
General Education/MnTC Requirements
12
Twelve (12) general education credits of Minnesota Transfer Curriculum (MnTC) are required. Student is required to take:
 *MATH1400  Algebra & Trigonometry (approved MnTC Goal Area Four)
5

The remaining seven (7) credits must be taken from the Minnesota Transfer Curriculum (MnTC).

*MATH1700 Pre - Calculus (approved MnTC Goal Area four) may be substituted for MATH 1400.

Program Sequence

FIRST YEAR
Fall Semester
ETEC1101 DC Power Theory/Lab
5
ETEC1111 AC Power Theory/Lab
5
ETEC1250 Digital 1
3
**MATH1400 or 900 Algebra & Trigonometry or Elementary & Intermediate Algebra
5
TOTAL
18*
Spring Semester
ETEC1201 Solid State Electronic Devices
5
ETEC1270 Technical Documentation Lab
2
ETEC1300 Op-Amps and Linear Integrated Circuits
2
ETEC2137 Computer Controlled Systems Integrating LabVIEW
4
*GENERAL EDUCATION 4
TOTAL
17*
SECOND YEAR
Fall Semester
ETEC2010 Basic Wireless Communications
2
ETEC2147 Data Acquisition and Signal Conditioning
4
ETEC2070 Programmable Logic Controllers (PLCs)
2
ETEC2181 A+ Certification and Computer Troubleshooting
6
TOTAL
14
Spring Semester
ETEC2181 Automation and Control Concepts
4
ETEC2260 Advanced Wireless Communications
3
ETEC2281 Advanced Network Setup and Troubleshooting
7
*GENERAL EDUCATION
3
TOTAL
14*

*For the Diploma: Twelve (12) General Education Credits from the Minnesota Transfer Curriculum (MnTC) are required for graduation in addition to the above Electronics courses. MATH 1400 Algebra & Trigonometry or MATH 900 Elementary & Intermediate Algebra is required for the diploma.

Consult with your program advisor to select courses for the upcoming semester.

Graduation Requirements

All Anoka Technical College students must demonstrate basic competency in Math, English, and Reading. Competency may be demonstrated through achieving minimum cut scores in new student assessments (Accuplacer); through other assessment exemptions; or through successful completion of Basic Math, Basic English, and Reading courses, earning a “C” or higher before receiving a diploma or an associate in applied science degree.

 Also see graduation standards in Anoka Technical College Student Handbook.

NOTE: Program plans are subject to change. Please contact your program advisor for the most current program information.

Transfer Opportunities

The Anoka Technical College Computer Servicing/Networking Technician diploma has credit transferability to the to the Computer Servicing/Networking Technicianemphasis associate in applied science (AAS);  A+ Personal Computer Support Technician diploma; Electronic Controls Technician emphasis associate in applied science (AAS); Special Electronics Technician diploma; Electronic Technician diploma; Special Electronics Technician diploma, and Electric Certificate I, and Electronic Certificate II programs.

For students who want to continue their education and obtain their four-year degree, the Electronic Engineering Technology (EET) program, has articulation agreements with Minnesota State University (Mankato), Minnesota State University (Moorhead), Bemidji State University, and University of Minnesota Crookston. Students can complete most of these four-year degrees through online courses.

To see how this program transfers to other programs, review the Anoka Tech articulation agreements at Minnesota Transfer. Articulation agreements are transfer agreements with specific programs and partnering schools. These agreements detail how specific courses transfer to a specific program at the partnering school. For a complete list of Anoka Tech’s articulation agreements listed by program please see this Minnesota Transfer link.

This program may also include Minnesota Transfer Curriculum (MnTC) courses. MnTC courses transfer to meet MnTC general education courses throughout the Minnesota State Colleges and Universities (MnSCU) system. MnTC courses from Anoka Technical College transfer to any MnSCU institution to meet the same goal areas that are met at Anoka Tech.

Students are encouraged to contact the Office of Records and Registration at all transfer schools for details about the institution’s transfer process and policies.

For more information please visit our Transfer page.

Wage/Outlook/Advancement

The Anoka Technical College 20-credit Special Electronic Technical emphasis is a great addition to any of the EET programs.

The Special Electronic Technical emphasis is an individualized degree program that requires pre-approval from the electronic engineering department chairperson. See your program advisor for more information.

Wage information is available from the Minnesota Department of Education and the Minnesota Department of Employment and Economic Development.

Faculty

Daniel Truchon
763-576-4700

Awards

Degree
Diploma

Start

Fall: August

Contact

Daniel Truchon
763-576-4904